top of page


CNC MILLING
• 2017 Okuma Genos M-560V 3-Axis Vertical Milling Centre: 20" x 40" x 18", 15,000 RPM with Tsudakoma 8" 4th Axis Rotary Tables & Pneumatic Tailstocks (Quantity 7)
• 2016 Matsuura LX-160 5-Axis High Grade Linear Motor Machine: 9.84" x 11.81" x 19.69", 46,000 RPM
• 2016 Okuma MU-4000V 5-Axis Vertical Milling Centre: 18.11" x 18.11'' x 29.13'’, 20,000 RPM
• 2012 Matsuura CUBLEX-25 5-Axis Multi-Tasking Machining Centre: 16.14" x 17.71'' x 21.65''’, 15,000 RPM
• 2014 Matsuura MX-520 5-Axis Vertical Milling Centre: 24.8’’ x 22.04’’ x 20.07’’, 20,000 RPM
• 2013 Matsuura MX-520 5-Axis Vertical Milling Centre: 24.8’’ x 22.04’’ x 20.07’’, 20,000 RPM
• 2012 Okuma Genos M-560V 3-Axis Vertical Milling Centre: 20" x 40" x 18", 12,000 RPM
• 2006 Okuma MB-46 VAE 4-Axis Vertical Milling Centre: 18" x 30" x 18", 15,000 RPM
• 2008 Brother TC22B-O 3-Axis Vertical Milling Centre: 17" x 27" x 16", 16,000 RPM
• 2010 Haas DT-1 3-Axis Vertical Milling Centre: 15.5" x 16" x 20", 12,000 RPM


CNC TURNING
• 2007 Okuma Captain L370MW, Dual Spindle Lathe with Live Tooling

CNC EDM
• 2016 GFMS EDM Wire – Cut E350
• 2016 GFMS EDM Sink - Form20
• 2013 Agie EDM Wire – Agiecut 20P
• 2013 Agie EDM Sink – Roboform 350

INSPECTION
• 2008 Zeiss Contura G2 CMM - Vast XT Active Scanning Head - 1200mm x 1000mm x 600mm
• 2015 Zeiss Duramax CMM - VAST XXT TL3 Scanning Sensor System - 500mm x 500mm x 500mm
• Qualified Inspector with a dedicated inspection facility and measuring tools & equipment

ADDITIONAL CAPABILITIES
• Finite deburring capabilities to .000"-.003" radius/chamfers
• Lapping & Polishing to specific finishes
• 7x to 40x magnification deburring
• Qualified deburring technicians with a dedicated facility & tooling

Okuma_MU-40000VÂ 5-Axis_Multi-Tasking_Machining_Centre

Matsuura LX-160 5-Axis High Grade Linear Motor Matchine

Cublex - Small.jpg


Mitsubishi EDM

GFMS_EDM_Wire_–_Cut_E350

bottom of page